Every zone, its setpoint
Offices, halls and floors at independent temperatures — and consumption follows real use, not the master switch.
Home/Maintenance & business/VRF / VRV systems
Maintenance & business
VRF / VRV systems in Valencia: design and installation
When a building has twenty zones on twenty schedules, the multi-split gives up and the VRF steps in: variable refrigerant flow, heat recovery and every office at its own temperature — paying only for the energy actually used.
We reply in writing — no calls unless you ask for one.
Quick summary
We design and install VRF/VRV systems in Valencia from €5,490 for a base system: variable flow, up to dozens of indoor units per system, heat recovery and centralised control. For offices, hotels, clinics and whole buildings. WhatsApp: +34 617 307 409.
What is a VRF system and when do you need it?
VRF (or VRV, the brand that invented it) means variable refrigerant flow: one or more outdoor units feed dozens of indoor ones, delivering to each zone exactly the flow it asks for at each moment. With heat recovery, the system cools the server room and heats reception simultaneously — moving heat instead of buying it. It is the standard engineering of hotels, headquarters and office buildings.
Key facts
- Price
- from €5,490 base system · projects by building
- Scale
- from 4 to dozens of zones per system
- Efficiency
- partial load + heat recovery
- Control
- centralised by zones, schedules and users
- Sectors
- offices, hotels, clinics, buildings
- Contact
- WhatsApp +34 617 307 409
Why us
Variable flow engineering, properly applied
Heat recovery
Surplus heat from cooled zones warms the ones asking for heat: simultaneous heating and cooling at efficiencies conventional systems cannot touch.
Fewer outdoor units, more roof
One VRF outdoor unit replaces a row of condensers — the roof breathes and maintenance simplifies.
A signed design
Load calculation, refrigerant schematic and full technical documentation — as an installation of this scale demands.
Specialist maintenance
Diagnosis over the communications bus, per-zone readings and per-building reports — VRF has its own discipline, and we practise it.
How we work
A VRF, from design to a working building
Building study
Zones, loads, schedules and roof — the basis of the schematic.
Design and figure
Refrigerant schematic, equipment and a phased work plan.
Coordinated installation
Floor-by-floor assembly with the building in use where needed.
Commissioning
Zone balancing, control configured, training delivered.
The price
The price of a VRF system
From
€5,490
From €5,490 for a base 4–5 zone system. Every VRF project carries its own load study and figure — fixed in writing after the building's technical visit.
- What the price includes
- Load study and refrigerant schematic
- Outdoor and indoor units installed
- Refrigerant network nitrogen-tested
- Centralised control configured
- Technical documentation and written guarantee
Sound familiar?
VRF is your system if…
- You manage a building, hotel or multi-floor HQ
- Every zone needs its own schedule and temperature
- The roof cannot take twenty condensers
- The climate's energy bill has run away
- You need simultaneous heating and cooling by zone
- Your existing VRF needs specialist maintenance
Valencia · 39°28′N 0°22′W
VRF projects across Valencia and the metro area
City headquarters, coastal hotels and office buildings in the business parks — design, installation and maintenance with a single responsible manager.
FAQ
FAQ about VRF/VRV
What is the difference between VRF and VRV?
None technically: VRV is the registered trademark of the manufacturer that invented the technology; VRF is the generic term everyone else uses. Both mean variable refrigerant flow.
How much does a VRF system cost?
The base 4–5 zone system starts at €5,490; a whole building is designed after the load study with a fixed figure. Commercially, VRF is priced by zones and capacity — always in writing.
Does VRF beat multi-splits in a big office?
From 6–8 zones with differing schedules, almost always: VRF runs at partial load with high efficiency, centralises control and frees façade and roof. The load study answers with numbers.
Can you maintain a VRF another company installed?
Yes — diagnosis over the communications bus, per-zone readings, indoor unit cleaning and outdoor checks, with a per-building report. We rebuild the service history even where none exists.
What is heat recovery in a VRF?
Three-pipe systems move surplus heat from zones being cooled to zones asking for warmth — instead of dumping it outside. In buildings with opposite orientations or server rooms, the saving is structural.
Related services
Complete your climate project.
Your building deserves engineering, not patches.
Tell us floors and zones — we propose the schematic and a no-obligation technical visit.